CAD Custom Machining & Design
0%
CAD Custom Machining & Design
One continuous shot

Precision starts as light.

Every job is programmed and simulated in Mastercam before a chip flies — toolpaths proven, collisions caught, cycle time known.

Chapter Two · The Cut

The machine does what the program proved.

Haas VF2, 3+2-axis — high-tolerance prototypes and short production runs in aluminum, stainless and steel.

Chapter Three · The Proof

We don’t say it’s in spec. We prove it.

Every critical dimension verified on-site with American/Swiss metrology tooling.

Chapter Four · The Part

Precision in every cut.

Programmed, cut and proven under one roof in Banks, Oregon. Send us the print.

Request an Estimate Capabilities
Scroll to walk

One part, followed from program to proof — the way we run every job for aerospace, agriculture, marine, clean energy and heavy industry — and for the tech industry, from AI hardware to emerging technologies.

Who we are

Owner Charlie Duyck brings over 30 years of experience delivering specialized small-scale manufacturing for industries spanning automotive, aerospace, consumer goods and beyond. Charlie is certified in beginning and advanced CNC programming, with advanced training in Mastercam. Rigorous quality control at every step — from raw material to finished part — means every product meets or exceeds industry standards.

Capabilities

Precision in every cut. Excellence by design.

01

CNC Programming

Mastercam programming with full toolpath simulation — every job proven on screen before it touches metal.

Read about this service → 02

High-Tolerance Prototypes

One-off and first-article parts machined to tight tolerances from your print or model.

Read about this service → 03

Short Production Runs

Custom short-run production with repeatable setups and in-process checks.

Read about this service → 04

CNC Milling — Haas VF2, 3+2-Axis

Vertical machining in aluminum, stainless and low-carbon steel on a Haas VF2 with 3+2-axis workholding.

Read about this service → 05

Metrology & Inspection

On-site metrology verification — Sylvac & Fowler digital height validation and Starrett HE350 optical profile comparison, calibrated on-site.

Read about this service → 06

Design & CAD

Part and fixture design support — from concept or sample to a manufacturable CAD model.

Read about this service →

What we run

The floor, the metrology bench and the programming seat behind every part.

2× 2018 Haas VF2

30" × 16" × 20" travels — 20-position tool changer

2017 Haas TM-1P

30" × 12" × 16" travels — 10-position tool changer

2012 Haas Mini Mill

16" × 12" × 10" travels — 10-position tool changer

2× Haas HRT160 4th Axis

Equipped with fixturing that achieves 3+2 capabilities

2007 GANESH Mini Turn

.125"–1.062" bar capacity — X-travel 8.46", Z-travel 5.98"

Jet Elite Horizontal Bandsaw

Jet 10" × 16" horizontal sawing capacity

Tapping Arm & Ultimaker 2

Production tapping arm plus an Ultimaker 2 3D printer for fixtures and prototypes

Digital Height Gages

Sylvac 18" and Fowler 24" digital height gages

Starrett HE350 Optical Comparator

With a Quadra check 200 for profile inspection

CAM Programming

1 seat of Mastercam — CAM programming and full toolpath simulation

Banks, OR

Request a callback or RFQ review.

Have drawings (STEP, IGES, DXF) or a blueprint you want Charlie to look at? Fill out the form and CAD Custom will follow up, usually within the day.

Prefer to talk? (503) 702-9242 · Or email cadmfg@gmail.com

AI Assistant

Answers in seconds · 24/7

This is an automated AI assistant for CAD Custom Machining & Design. It can answer questions about the shop's capabilities and your part — pricing and lead times are always confirmed by the shop directly.

Hi! I'm, the automated assistant for CAD Custom Machining & Design. Ask me anything about your project — or tell me what you need and I'll point you to the estimate form.
Proposed concept A custom concept for CAD Custom Machining & Design — make it yours. ▶ Watch the walkthrough